Add：Baoyuan road No.3, jingguzhou development area,xinhui,jiangmen, guangdong(Continental factory)
First, pay attention to the automatic operation of the linear module
1. Please set up a safety fence at the movable range of the linear slide.
2. At the entrance of the safety fence, please design an emergency switch device.
3. Please try not to enter or exit from the entrance other than the relevant emergency switch device.
Second, pay attention to gripping hands
1. When operating the linear slide, please be careful not to put your hands or other objects into the movement range of the module.
Third, the operating instructions
1. Before installing the linear module, you must read the operating instructions and the instructions in the installation manual.
2. If the installation manual does not include installation, adjustment, inspection, linear module maintenance, operation, etc., please consult the after-sale operation, if it is not possible, you should not try it yourself.
Fourth, the use in flammable gas and other environments is prohibited
1. The linear slide has no explosion-proof specifications.
2. Do not use in flammable gas, flammable powder, flammable liquid and other environments.
V. Prohibition of use in situations where electromagnetic harm is possible
1. Please don't use in the occasions with electromagnetic injury, electrostatic discharge, infinite magnetic waves, etc.
Six, precautions when installing linear slide brakes vertically
1. Before releasing the brake, block the upper and lower shafts with a block or other items.
Seven, safety matters of the protective block (collision block)
1. The protection block is designed and installed to prevent the danger (power, air pressure, etc.) from disappearing or changing.
2. The protective block will be dangerous when the object is dropped. For the survey of the size, weight, temperature, and chemical properties of the object, appropriate safety monitoring and testing will be taken.
Eight, matters needing attention in the controller inspection
1. When checking the controller, touching the terminals on the outside of the controller, or connecting the post, the characteristics of the linear module should be cut off the controller link in order to prevent static electricity.
2. Do not touch the inside of the controller.
Nine, deal with the loss and abnormality of the linear slide
1. In the event of an abnormal situation or loss, please stop using it immediately and contact the after-sales technicians.
Ten, precautions when the motor and reducer generate high temperature
1. The motor and the reducer may generate high temperature during operation. When inspecting the linear slide, make sure that the motor and the reducer stop rotating and contact when the temperature drops.
XI. It is forbidden to remove, change and damage the warning signs
1. It is forbidden to remove the warning sign without permission.
2. Do not cover the warning signs with nearby machinery or objects.
3. Make sure that the pattern of warning signs and text can be seen from outside the safety protection fence.
Twelve static protection
Be sure to ground the linear slide and controller.